Ford Ranger T6 4th Gen (2019-2022) Slimline II Roof Rack Kit

Front Runner | Ford Ranger

€ 1.119,00 incl. VAT
This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen. Drilling into the vehicles roof is required.
Ordered today before 3 p.m. delivered tomorrow Longer delivery time
  • More than 3500 articles
  • More than 20 years of experience & expertise
  • We have the widest range of off road products
  • Ordered today before 3 p.m. shipped the same day

Specifications

Product no. KRFM010T
i Brand Front Runner
i Car type Ford Ranger

Downloads

Fittinginstruction Fittinginstruction

Description

KRFM010T - Ford Ranger T6 4th Gen (2019-2022) Slimline II Roof Rack Kit - by Front Runner nConsisting of: n1 x FAFR001 - Ford Ranger (2012-Current) Foot Rails - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner n  nMaterial used: nBlack epoxy powder-coated T6 aluminium High strength steel nApproximate Installed Weight 26kg (56lbs) nThe t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. nTo determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. n  nShipping Dimensions: nWidth 450mm (18'')Length 1615mm (64'')Height 140mm (6'') n  nShipping Weight: nWeight 29.9kg (65.7lbs) nThis 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen. Drilling into the vehicles roof is required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller TBRA018 or 1 larger TBRA017).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab. * Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.