FIAT DUCATO (L2H1/136" WB/LOW ROOF) (2014-PRESENT) SLIMPRO VAN RACK KIT - BY FRONT RUNNER
Front Runner | Fiat Ducato
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Configure your Slimpro Van Rack to suit any adventure by adding the RACK ACCESSORIES or explore them later when a new adventure calls.
- More than 3500 articles
- More than 20 years of experience & expertise
- We have the widest range of off road products
- Ordered today before 3 p.m. shipped the same day
Specifications
| Product no. | KVFR001TBP | |
| Car type | Fiat Ducato | |
| Brand | Front Runner |
Description
Compatible with 2014-current Fiat Ducato (L2H2/136" WB) high roof vans with a vehicle length of 5413 mm / 213.1".
Loading area: 2974 mm (117.1") x 1565 mm (61.6").
Six (6) mounting feet secure into the van's existing factory mounting points.
The included batten bracket can be reversed for a lower profile at a height of 85mm (3.4"), or can be left in the standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
The louvers can be configured at any distance to accommodate the roof air conditioner, vents or other accessories.
Assembly instructions and all mounting hardware are included. Drilling or modification is not necessary.
Consisting of:
3x FAVF002 - FPCR Foot Set - from Front Runner
1x RRAC207 - Joiner's Set for Vans
2x RRAC208 - Van Rack side profile end caps
4x RRNS1475 - Narrow batten / 1475mm (pair)
1x SPVT002 - Van Rack side profile / 1358mm
1x SPVT003 - Van Rack side profile / 1560mm
1x WDST013 - Wind Deflector From Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminum
High strength steel
Mounted Rack Kit Dimensions:
2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Estimated installed weight: 31.49 kg (69.42 lbs)
The heights of the Fiat Ducato Van Rack Kit are adjustable from 80mm (Z-bracket reversed) to 130mm (Z-bracket standard mounting). All measurements are taken from the bottom of the gutter to the top of the rack.
The slats T-slots and side profiles take standard M8 hex bolts top and bottom.
Shipping dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
